How to Specify Brise Soleil: Key Measurements, Angles and Mounting Considerations

Why brise soleil specification needs to be precise

When we design solar shading, we start with a clear brief: protect occupants and key interior zones, reduce glare, and support the building’s architectural intent. Brise soleil then becomes a performance component as much as a visual one. That means our specification has to be detailed enough for fabrication, accurate enough for installation, and practical enough for ongoing maintenance.

Whether you are an architect, developer or facilities team, getting the measurements, angles and mounting approach right at the specification stage saves time later. It reduces on site adjustments, improves alignment, and makes the system easier to keep clean and inspect over its lifetime.

If you are planning a wider package of architectural metal fabrication, we also share how we structure bespoke projects from concept through to site delivery in our guide to what is included in bespoke fabrication projects.

Start with the design intent and the shading target

Before we touch a drawing set, we recommend specifying the outcome you want. Brise soleil can be used to control solar gain, manage glare, and protect finishes, furnishings and flooring from UV impact. The “how” changes depending on where the shading needs to work hardest.

For example:

  • Glare and comfort often require careful positioning relative to window height and viewing angles.

  • Furniture and flooring protection depends on how much direct sunlight reaches interior surfaces, which is influenced by blade spacing and depth.

  • Architectural rhythm depends on blade size, pitch, and uniformity across bays.

These decisions guide the measurements that follow. If your brief includes protection and longevity, it is also worth considering the wider benefits of modern solar shading. You can read more in our overview of the benefits of modern solar shading systems.

Key measurements to specify (what we need on the drawing)

In our experience, most specification issues come back to missing or ambiguous dimensions. A clear set of measurements lets us translate the design into fabrication-ready layouts and gives installers predictable tolerances.

1) The opening and façade reference points

Specify the façade grid and the reference system used for setting out. We typically need:

  • Window or opening width and height

  • Head and sill levels, plus any offsets from façade datum

  • Bay spacing and mullion positions (if relevant)

This is especially important when the installation zone is influenced by render thickness, cladding and soffits, or existing architectural reveals.

2) Blade geometry: depth, width and thickness

Blade dimensions directly affect performance. Specify:

  • Blade depth (projection from the mounting plane)

  • Blade width and consistent blade thickness

  • Any end returns or features that change airflow and cleaning access

If you are balancing style and performance, this is where we can help ensure the system achieves the shading effect without creating unnecessary visual bulk.

3) Blade spacing (pitch) and overall coverage

The gap between blades influences how much light is admitted and how the system manages glare. Pitch needs to be clearly defined, and coverage needs to be stated:

  • Whether blades run full height or are segmented

  • Whether the system is continuous across multiple bays or set out per opening

  • How soffits and adjacent cladding interfaces will be handled

Where necessary, we’ll propose a specification approach that supports accurate installation around local façade variations.

4) Mounting clearances and fixing zones

Even a well-designed brise soleil can be compromised if fixing zones are not planned. When specifying mounting, include:

  • Minimum clearance from the window frame and any hardware

  • Fixing centre distances and allowable tolerances

  • Access clearances for installation tools and future service

Where the façade includes cladding and soffits, we also recommend clarifying interfaces so the mounting method does not rely on uncertain layers.

Angles and orientation, explained in practical terms

Brise soleil performance depends on geometry, orientation and how the blades “see” the sun. As a specification baseline, we recommend stating:

  • The intended orientation (for example, north, south, east or west elevations)

  • The blade angle relative to the mounting plane (or relative to horizontal, if that is your standard)

  • Whether blades are fixed or if any adjustability is intended

On many projects, a small change in projection or angle can make a noticeable difference to how the system manages summer sun versus shoulder seasons. We often support teams by checking that the specification aligns with the intended performance zone across the year, not just peak summer.

For a useful related perspective on how solar shading performs beyond the obvious hot months, you may also find our note on how solar shading still helps in winter helpful when your specification needs to cover year-round comfort.

Mounting considerations that prevent problems on site

Mounting is where design meets reality. We always consider how the installation will actually be carried out and how it will be maintained.

Substrate and façade build-up

Specify what the brise soleil mounts to. Is it structural steel, a secondary frame, brickwork, or a façade system? We need clarity on substrate and tolerances, particularly where there are layers such as render, cladding and soffits.

Thermal movement and tolerances

Metal systems move. Specification should account for workable tolerances and fixing strategies that allow for expected movement without distortion or undue stress.

Drainage, cleaning access and maintenance

Over time, solar shading can collect dust and debris. If the system is too tight or has hard-to-access pockets, maintenance becomes costly and less frequent. We recommend specifying:

  • Maintenance access routes

  • Blade profiles that allow water run-off

  • Safe inspection points for fixings and interfaces

This is also where we consider adjacent elements. If your project includes canopies and pergolas alongside shading, consistent detailing improves both appearance and long-term serviceability. You can see how we approach these structures in our guide to pergolas and canopies.

Use 3D modelling to lock in accuracy before fabrication

For complex façades and multi-element designs, we strongly encourage 3D modelling before fabrication. It improves alignment, reduces clashes and helps confirm that blade spacing, offsets and interfaces match the real building.

We explain how 3D modelling improves accuracy for pergolas, canopies and complex metalwork in our dedicated article on 3D modelling. The same principles apply when specifying brise soleil as part of a coordinated architectural metal fabrication package.

Final checklist for brise soleil specification

  • Façade reference points, bay grid and opening dimensions

  • Blade depth, width and thickness

  • Blade pitch and coverage strategy

  • Blade angle relative to the mounting plane and elevation orientation

  • Mounting clearances, fixing zones and substrate details

  • Maintenance and cleaning access, including drainage considerations

  • 3D modelling review for complex interfaces and coordinated installations

When these points are clear, brise soleil moves from a concept detail to a robust, installable solar shading system. If you want, we can help you translate drawings into a specification that supports fabrication accuracy, straightforward installation and dependable aftercare.